Basic Info.
Specification
1200*961*2112mm
Product Description
Product Description
MLGT Series Paddy Husker
1. Product Description
Introduction:
MLGT series roller is not only refer to the global common advanced characteristics of rice huller, but also combined with the professional research achievements of our company, well-designed products, the ideal equipment. This machine uses a pair of different speed rotating rubber roller, it can squeeze and rub rice under a certain pressure to achieve the purpose of threshing, than make use of the different speed of suspension between brown rice and rice husk reuse of brown rice husk and suspension speed difference to separate them with induced draft.
Features:
Higher rate of hulling, lower rate of broken:
This machine uses the reasonable lineal-speed differential and adjustable pressure between rollers, 90% of hulling rate, less than 5% of broken, it able to stay stability in the process of production.
Easy to use:
Adjusting handle, automatic feed plate, rollers swap with gearbox. Smooth operation: Main rotary parts are passed strict inspection, smooth running, smaller vibration.
Low abrasion of robber roller:
Best ventilation to avoid overheating to wear rubber roller, adopts double supporting structure, reliable performance.
2. Parameter
| Main technical data |
| Model | MLGT25(10') | MLGT36(14') | MLGT51(20') | MLGT71(28') |
| Capacity(t/h) | 2.5-3.5 | 4-4.8 | 6-6.8 | 7-9 |
| Power(k w) | 5.5 | 7.5 | 11 | 15 |
| Kinds of troubles | Causes | Shooting methods |
1. Too low hulling rate. | 1. Too high output
2. Line speed difference is increased because rubber is worn away.
3. Edge, grooves and not round surface or uneven reduction of rubber roll diameter are caused.
4. Pressure between rolls is not enough. | 1. Turn the gate smaller, control the flow rate.
2. Correctly shift the gearbox.
3. Shooting according to 5th kind of troubles.
4.Appropriately increase the press weight. |
2. Too much husk in the mixture of paddy and brown rice. | 1. Too little air volume.
2. A bit too great angle of louver trickle plates or too high air adjusting plate.
3. Pneumatic conveying pipe for husk is blocked.
4. Too high output. | 1. Increase air volume.
2. Adjust correspondingly.
3. Inspect and clean out.
4. Reduce gate and control flow rate. |
| 3.Too much rice in husk. | 1. Too high air volume.
2. A bit too little angle of louver trickle plates or too low air adjusting plate.
3. Fan belt is loose and slipping. | 1. Decrease air volume.
2. Adjust correspondingly.
3. Inspect and tighten belt. |
4. Much broken and
cracked rice out of the huller. | 1.Too high pressure between two rolls.
2. Too hard roll surface.
3. Water content of rice is too high or cracked rice is too much.
4. Rubber layer is worn off. | 1. Reduce pressure weight.
2.Use rubber roll with proper hardness.
3.Treat it again.
4.Replace rubber roll. |
5. Edge, grooves and not round surface or uneven reduction of rubber roll diameter are caused.
| 1.Two rubber rolls are not aligned (edge caused).
2.Long trickle plates are not centralized (edge caused).
3.Feed is uneven and there is foreign matter in rice.
4.Bearings are damaged (uneven reduction of rubber roll diameter are caused). | 1.Adjust them to be aligned.
2.Adjust.
3.Check lower outlet of trickle plates for parallel with rubber rolls, enhance stoning and magnetic separation.
|
| 6.Too strong vibration in each position of the machine. | 1.Rubber rolls are extremely not balanced.
2.Fasteners are loose.
3.Bearings of rubber rolls or gearbox are damaged.
4.Foundation bolts are loose. | 1.Carry out static balance correcting.
2.Inspect and fasten.
3.Replace bearings.
4. Inspect and fasten. |
| 7.Unnormal heat of machine position | 1.Leakage of grease or too much grease in gearbox.
2.Bearing damage or oil lost at machine head.
3. Gearbox bearing damage.
4. Strong frication of rubber rolls.
5.Too tight V-belt.
6.Damage of motor and fan. | 1. Properly increase or decrease lubricating grease.
2.Replace or add grease.
3. Replacing.
4.Adjust roll gap.
5. Properly tighten it.
6.Repair them. |
| 8. Noise of machine is too high. | 1.Rubber rolls are not balanced or have frication without load.
2.Damage of rolling bearings.
3.Oil lost at drive position.
4.Damage of gears.
5.Couplings are coaxial. | 1.Static balance adjusting.
2.Inspect and replace them.
3.Inject oil.
4.Replacing.
5.Corecting. |
Company Profile
FAQ
Q1: What's your advantage? Why we choose you?
A: 1. Above 20 years' experience of designing, manufacturing and exporting of the grain and oil processing machinery. We have the most professional techniques and team and more advantage in price.
2. Over than 15-Years' Alibaba Gold Member. "Integrity, Quality, Commitment, Innovation" is our values.
Q2: Can we mix different models and accessories together?
A: You may mix different products or models in a single container but we would need to advise you on optimum loading and final capacity of your shipment.
Q3: How do I visit you and the factory?
A: You are welcomed to visit us and our factory at your convenience. We can pick you up at airport or train station and bring you to our factory . Let us know your schedule in details so we can arrange everything for you. Normally you need 3 days for an adequate visit to our factory.
Q4: How can I become a dealer in my area?
A: If you are qualified, you may apply for a dealership. We choose reliable partners for a long term business cooperation.
Q5: Can I get an exclusive right for your machines in some territories?
A: It depends on which country you are in. We have exclusive agents at several countries at this time. Most countries you can sell freely.
Q6: After payment, how long will it take to get the machines we order?
A: Normally 30-90 days after your payment (15-45 days for manufacturing, 15 - 45 days for delivery and shipment on sea)
Q7: How to order the spare parts?
A: Some machines will come with some free spare parts. We also advise you purchase some wearing parts with the machines together to stock for urgent replacement, we can send you recommended parts list.
Q8: I knew nothing about these machines, what kind of machine I should choose?
A: Very easy. Let us know your idea about the capacity or budget, you will also be asked some easy questions, then we can recommend you good models according to the information.
Q9: What is your warranty period?
A: Our company offer 12 months warranty since goods arrival at destination. If there is any quality problem which caused by material or workmanship fault during the warranty period, please contact us directly and we'll supply free spare parts for replacement.
Q10: What is the warranty range?
A: The quality problem which caused by material or workmanship fault will be covered by warranty. The wearing parts and electric device are not included in warranty range. Any troubles and damages that caused by misplacement, misuse, improper operation, poor maintenance and non-compliance with seller's instructions will however be excluded from the guarantee.
Q11: Does your price include freight?
A: Our usual price is based on FOB China. If you request CIF price including freight cost, please let us know the discharging port, we will quote freight cost according to the machine model and shipping size
Q12: If your prices include the installation?
A: The prices for machines and installation are quoted separately. The price of machines does not include the installation cost.
Q13: If you supply installation service?
A: Yes. We can send engineers to guide your local workers to install and debug the machines. The engineers will guide you install the machines, test and commissioning, as well as train your technicians on how to operate, maintain and repair the machines.
Q14: What is the installation cost?
A: Here are the charges of installation services might be incurred:
1. Visa fee for engineers.
2. Traveling cost of round-trip tickets for our engineers from/to your country.
3. Lodging: the local accommodation and also ensure engineers' safety in your country.
4. Subsidy for engineers.
5. Cost for local workers and Chinese interpreter.
Q15: How can I run my machines after installation? Who will operate the machines?
A: You can employ some local people or technician to work with our engineers together during installation. After installation, some of them could be trained as operator or technician to work for you.
Q16: How can I do if I met problems during running the machines?
A: We will send English manuals with the machines, we will also train your own technicians. If there is still doubts during operation, you can contact us directly with your questions.
Q17: What are the prices of your machines?
A: The prices are different for different models with different configurations. If you want to know more details, please send us messages right now.
Address:
Biyun East Rd., Anlu City, Xiaogan, Hubei, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Located in Anlu City of Hubei Province of China, Hubei Bishan Machinery Co., Ltd, a factory specialized in grain and oil processing machinery manufacturing. The company fabricates of rice milling equipment and heavy edible oil extracting equipment.
The company now occupies an area of 90000 square meters, in it there are 300 sets of various machine tools and more than 500 employees. The company has the capacity of producing 2000 sets of varied rice milling and oil extracting equipment. "To turn out quality machine products, establish famous brand, and constantly replace older generations of products by new ones", is always the objective for the company to strive for. Hence its machine products are sold well throughout China and all over the world.
Hubei Bishan Machinery Co., Ltd is a manufacturer specialized in supplying varied series of unit machineries and complete plants for edible oil pressing with tropical oil seeds such as palm fruits, desiccated coconuts and rubber seeds etc, and is also the base for exporting palm oil plants.
Through years of scientific research and production practice, the company has accumulated rice professional knowledge and practical experience; Therefore it is strong in technical capability. Now the company has gained the ISO9001: 2000 certificate of conformity of quality system certification, and awarded the title of "High-tech Enterprise"by Science and Technology Department of Hubei in 2004, it has established a primary basis of modern management, and the systems of management computerization, information automation and scientific production control has shaped up.
){kind=link}